EZ Cabin-Coat provides a moisture resistant and a mildew proof finish.Specially formulated to provide a moisture-resistant, mold- and mildew-proof finish, water-based EZ CabinCoat easily withstands humid conditions that foster unsightly mildew growth and cause paint failures in cabin interiors. Adhesion to most glossy surfaces is excellent without a need for sanding. Cleans up easily with soap and water. Key Features Interior high-performance coating for surfaces prone to moisture Tough mildew-proof finish Adheres to any glossy surface without having to sand Dries fast with low order and easy to apply Withstands humid conditions that can cause paint failures Physical Data Base Formulation: Water based emulsion Finish: Satin Available colors: Off white, Platinum grey, White Components: 1 Curing mechanism: Air dry Solids by Volume: 39.9% +/- 2% (Theoretical) Solids by weight: 50.9% +/- 2% (Theoretical) Coverage: 110sq. ft. /gal. VOC: 140 g/l Max. (as supplied) Flash point: None Application Application Method: Brush, roller or spray Number of coats recommended: 2 coats minimum Wet Film Thickness: 3.0 mils Dry Film Thickness: 1.5 mils Applicator: High-quality short nap roller (maximum 3/8” nap) brush Application temperature Min. /Max. Range: Minimum 50F and Maximum 90F. Thinner: 120 Brushing Thinner 121 spraying thinner; Model 249961; 121 - Model 249995 Drying Times*(Hours) Drying @50F @70F @90F 4 hr. 2 hr. 1 hr. *The above dry times are minimums. May be