Season-long antifouling that withstands trailered boats and beachingEffective in fresh- or saltwater, this hard modified epoxy paint provides affordable antifouling protection for all typesof vessels. Compatability with all properly prepared hard bottom paints permits overcoating without fear of lifting.Key FeaturesHard and durable finish Finish is able to withstand beaching and traileringApply over most other antifoulingHigh copper contentPhysical DataType: Modified Epoxy/RosinFinish: FlatAvailable colors: Red, Blue, Black, GreenComponents: 1Curing mechanism: Solvent ReleaseSolids by weight (Theoretical): 77 +/- 3%Solids by Volume (Theoretical): 55 +/- 4%Coverage: 440sq.ft./gal.VOC: 440 g/l max.Active ingredients: 33.26% Cuprous oxideFlash point: 114F (SETA)ApplicationApplication Method: Brush, roller, airless, or conventional sprayNumber of coats recommended: 2Dry Film Thickness: 2 milsWet Film Thickness: 3.6 milsApplicator: High-quality short nap roller (maximum 3/8” nap)Application temperature: Min. /Max. Range: 40 F. Min/90F. MaxThinner: Special Thinner 120 model 249961; Spray: 121 Spraying Thinner, model 249995Drying times (Hours) Drying @40F @70F @90F To recoat 12 hr. 6 hr. 3 hr. To launch 24 hr. 16 hr. 8 hr. *The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time beforelaunching.Get the right amount of paint: Boat Type Bottom Paint 10' Dinghy